New Hot Melt

Model 102 Small Hot Melt Glue Spraying Machine Quantitative Gluing Machine


Model 102 Small Hot Melt Glue Spraying Machine Quantitative Gluing Machine
Model 102 Small Hot Melt Glue Spraying Machine Quantitative Gluing Machine
Model 102 Small Hot Melt Glue Spraying Machine Quantitative Gluing Machine
Model 102 Small Hot Melt Glue Spraying Machine Quantitative Gluing Machine
Model 102 Small Hot Melt Glue Spraying Machine Quantitative Gluing Machine
Model 102 Small Hot Melt Glue Spraying Machine Quantitative Gluing Machine

Model 102 Small Hot Melt Glue Spraying Machine Quantitative Gluing Machine    Model 102 Small Hot Melt Glue Spraying Machine Quantitative Gluing Machine

102A hot melt adhesive machine. The product is widely used, mainly in toys (attached fixed wiring, insulation);Box sealed packaging;Leather handbag;Small household appliances, wires, connectors, connectors;Audio, photo frame;The label;Hardware fixation;Adhesives and fixations for small paper products;Small ornaments, handicrafts, hairpins, etc. Fixing, bonding and insulation of electronic products;Others require manual or semi-automatic use of glue.

II:Product advantages and features. 1, light weight, small size, easy to move. Can be arbitrarily placed on the work table. 2, the opening of the tank is simple and easy, convenient feeding, high safety. Save energy, reduce the production cost of the enterprise effectively. 4, the structure is simple and easy to repair. Only according to the instructions of the use and maintenance guidance can be maintained.

5, pressure and flow can be adjusted. Can control the spray pressure and nozzle flow free travel.

Using 800W power and high efficiency thermal insulation device. To save energy, improve the melt speed.

7, the failure rate is low. The structure is clear, and the component parts are connected with the minimum system.

The use temperature can be 20 degrees C 200 c, under certain conditions can be used in 260. 9, the timer can control each usage amount. Can choose to control the time for 60 - 0 seconds of a variety of time controller. 10, valve control glue instant off sensitive.

The gas is used to open the spring, and the switch is sensitive. 11, low cost of equipment for enterprises to save investment. 12, the operation is simple, the new employees as long as 10 minutes of training that can operate independently of the equipment. 13, improve product performance and grade. Compared with the common hot melt glue gun, the product is bonded more firmly, and the efficiency is higher. 14, improve efficiency and reduce waste. After the glue without waiting, ready to use.

No glue noleak adhesive, reduce waste. 15, wide application range, no heating melt type, shape, viscosity, melting temperature, spraying and other restrictions. Always wear safety gloves, goggles, and long-sleeved work clothes to protect your body from hot liquids Hot glue scald, or by high temperature components surface burns.

Excessive water vapor should be avoided in the air path. The capacity of hot melt glue barrel shall not exceed 7 percent of the capacity of glue storage barrel. Set the maximum total pressure as 4KG. Before adding hot melt adhesive, pressure relief shall be conducted in the plastic storage bucket.

Before operation, it is strongly recommended that the operator take good safety precautions to reduce the probability of industrial injury to zero Combined with safety precautions. Check whether the operating voltage of the machine is 220VAC, and there is no fluctuation of the apparent voltage. Check the amount of glue in the barrel.

If less than 1 point full, please increase to 7 points full, do not exceed 7 points full. Check whether the temperature of the rubber barrel is set at about 170 ° c note: different hot-melt adhesives have different softening points; For specific set value, please refer to the data provided by hot melt adhesive supplier.

Check whether the foot switch is connected and whether conductive objects touch the components in the electric cabinet. Check whether the air supply system is basically dry and whether the pressure of the air path is stable.

Power on and ventilation test whether the circuit, gas circuit and rubber circuit can work normally. Connect the power supply and turn ON the power switch. Check whether the temperature of the temperature controller is in the above range. Check whether the pressure relief is turned in the direction of pressure holding.

Connect air source, set pressure value and start operation. Notice of hot melt adhesive. When adding hot melt glue to the plastic storage bucket, rotate the pressure retaining switch to the pressure relief direction first. After pressure relief, open the cover of the plastic barrel;Add hot melt adhesive. When adding hot melt adhesive, do not add more than 7 minutes of plastic storage barrel.

After hot melt glue is added, lock the cover of the barrel. Loosen foot switch and cut off the main power. Disconnect the air pipe or set the pressure regulating valve of the water filter cup to zero. A 102A hot melt adhesive machine(056278). Orders are processed from Monday-Friday; Not on the weekends & public holidays. We will work with you to get the case resolved in the fastest method.

Please contact with us at first for more details. If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it's much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on. If an item is received damaged, customer service must be contacted within 7 days of receiving your item. ECheck Issues: Payments via eCheck do not clear immediately.

Usually you will wait 5-7 days after checkout for it to clear. The item "Model 102 Small Hot Melt Glue Spraying Machine Quantitative Gluing Machine" is in sale since Monday, September 30, 2019. This item is in the category "Business & Industrial\Adhesives, Sealants & Tapes\Adhesive Guns & Dispensers\Hot Glue Dispensers".

The seller is "quickerseller36" and is located in Hayward, California. This item can be shipped to United States, Canada, United Kingdom, China, Mexico, Germany, Japan, France, Australia, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, Israel, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.
  1. MPN: 56-056278
  2. Brand: TECHTONGDA

Model 102 Small Hot Melt Glue Spraying Machine Quantitative Gluing Machine    Model 102 Small Hot Melt Glue Spraying Machine Quantitative Gluing Machine