APC Hot Melt Type Fiber Optic Quick Connector Telecom FTTH Fast Connector. Hot melt type optical fiber quick connector is by welding machine will continue to spot welding in the connector tail set, on the surface, not to contact, which is beautiful, solid. The splicer, connection point loss than the cold little, while avoiding the matching solution aging, reducing maintenance costs. Suitable for long-term use, so that the fiber to the user becomes efficient and stable. At present, in FTTH fiber to households in the engineering, optical fiber quick connector used most widely is used for cold connection mode, the cold junction with embedded fiber and through two ways.However, the fiber cold bonding technology, there are some problems: the cold products matching fluid too much dependence of; products of cutting knife, construction personnel of the fiber cutting technology and the operation of skilled earnest request is very high; the accuracy of the inspection of butt and the quality of the connection is able to assess. Hot melt type quick connector is directly with grinding good in core connector directly and the butterfly shaped cable, with a diameter of 3.0 mm in diameter 2.0mm, diameter of 0.9mm melting connected and splice inside the connector end, welding without additional protection. Compared with the mechanical type quick connector, site Hot quick connector can improve the optical performance of the connector, and achieve operation 100% pass rate, prolong the service life of the connector, and reduce the maintenance cost. Product advantage The 1 ferrule without on-site grinding, can be directly connected with the butterfly cable, Phi 3, Phi 2, Phi f0.9 weld. 2 can achieve high optical performance, the average insertion loss of less than -0.20dB, the return loss is more than 55dB. 3 products in the use of the process is not affected by the environment, the basic optical properties no change, no failure rate, long service life, reduce the cost of late maintenance. 4 tail specific optical fiber "micro bend" structure can be when the tail cable is subjected to violent tension to protect the effective. Splice inside the connector on the protection of the heat shrinkable tube, effective to splice protection, ensuring product safety performance and service life 6 the rear end of the special stepped up structure, the product of tensile strength is greater than 60N. 7 the operation is simple and quick, the operator needs no professional skills. If you want pay by T/T, Please ask for out Bank information. Please Check and Confirm the Part No.
The item "100pc SC Green Hot Melt Type Fiber Optic Quick Connector Telecom Fast Connecttor" is in sale since Tuesday, December 3, 2019. This item is in the category "Computers/Tablets & Networking\Computer Cables & Connectors\Networking Cables & Adapters\Optical Fiber Cables". The seller is "fiberoptictoolsshoppingmall" and is located in , . This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.