110V Electric Melting Furnace Scrap Metal Jewlery Silver Gold Smelting 1600w hot

  

110V Electric Melting Furnace Scrap Metal Jewlery Silver Gold Smelting 1600w hot. Be sure to check if the graphite pot is in good condition before using the machine.

If there is a crack, it is absolutely impossible to use it, or if it is too worn, it cannot be used. The problematic graphite pot can easily cause the graphite pot to suddenly break during the melting process, and the metal leaks out, causing damage to the machine. Capacity of the crucible:130.35cm3. External dimensions of the crucible: diameter:6.5 Height: 12.5.

Internal dimensions of the crucible: diameter:3.8 Height: 11.5. The PID module has two functions:to measure and to control the heating. Plug the device in the power source.

Press the ON / OFF button. Set the temperature(smelting temperature). Press the SET button: SV(=set value)flashes. Every single digit can be set. To select the digit you want to change, press the.

To save the selected value, press SET again. If you don't save the selected value, the device will automatically go. Back to the main display mode without holding the value which was set after. The device is starting the heating process.

The "OUT" light is lit until the. Temperature reaches the chosen value. As soon as the temperature is reached, the device stops heating.

Light flashes and the temperature remains constant. Cast the metal into the mold and put the crucible bac nto the heating chamber. Turn the furnace out as soon as the whole quantity of molten metal was used. The temperature measurement in the heating coil is made at regular intervals.

The information is transmittde to the PID module as current value. Current value is inferior to the set value, the PID module makes the device.

If the current value is superior or equal to the set value, the PID module. This cycle gets repeated at a 2-second-intervall. The advantages of the PID module in comparison to a normal thermostat. Are the flexibility, the efficiency and the precision. Thus, the energy consumption can be optimizde, and the material fatigue.

In order to ensure a long durability and a good function of your device. We strongly advice to work less than 3 hours at once. Stop for 30mins after 2 hours of continuous work. Periodically check the intactness of the crucible, to avoid damages of. The maximal operating temperature tolerated by the melting furnace. Recycled gold or silver contain acid and alkali which may corrode the. If you want to melt that kind of metals, please open the. Cover of the melting chamber with regularity to let the toxic substances. The graphite crucible is only adapted. To melt gold, Silver, copper and other sev. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business.

A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday. Specification Power:1600W Voltage:AC110V, 50Hz Measurement accuracy: +0.5%FS Working environment: 0-50°C, 30-85%RH Max.

The item "110V Electric Melting Furnace Scrap Metal Jewlery Silver Gold Smelting 1600w hot" is in sale since Tuesday, March 17, 2020. This item is in the category "Jewelry & Watches\Jewelry Design & Repair\Jewelry Tools\Jewelry Molds". The seller is "ksbestdeal-shopping" and is located in Dayton, New Jersey. This item can be shipped to United States.Heating temperature: 1150

Capacity of the crucible: 130.35cm3

Temperature Control system: the PID

Brand: Unbranded/Generic

Voltage: AC110V,50Hz

Measurement accuracy: +0.5%FS

Working environment: 0-50°C, 30-85%RH