Max binding thickness: two pages-40mm. Heating time: 15min (depends on ambient temperature). 1 x Binding machine 2.1 x Power cord 3. 1 x Adhesive can cap 4. 1 x Gliding handle of the adhesive can 5. 1 x Service manual 6. 1 x Adhesive bag 8. 2 x Inner hexagon spanner. Hot glue pellets (Random Shape)! Temperature-controlling instrument: the temperature is arranged at 338 at the time of exfactory (using the hot melt glue provided by our company); If hot melt glue of other style is adopted, the temperature can be adjusted according to its melting point. Operations of milling cutter: push the cutter to-and-fro, when the book spine is well milled, brush the adhesive. Hardcover hot groove-pressing device put the hard cover in the paper pressing clamp tightly and press the right handle down to tighten the hard cover for 5-10 seconds. Attention: there is electricity-powered constant temperature device (50) on the hardcover hot groove-pressing board; therefore, it should be avoided from destruction or touched by hands. The small switch at the right side can control whether the hardcover hot groove-pressing board is connected with electricity, so that the user can choose hot-pressing or cold-pressing.
Installation: Please lay the machine on a steady working platform, avoiding wet place. Proper space around should be ensured for convenient operation The can cap, and the gliding handle should be installed. Please connect to suitable power, and check the amount of the left adhesive.
Adhesive granule should be added in time. The heights of the adhesive not overrun the pointer inside the adhesive can. After connect the power, turn on the switch.
And the adhesive can is heated. The hot-melt time is 15-20 min. CAUTION: Do not push the adhesive can when it is cold or the hot-melt time is not sufficient, or else it can be damaged Keep the surroundings of the machine clean avoiding the impurity getting into the adhesive can and causing damage Avoid touching the adhesive roller with the hard material which can damage it. Please turn off the switch and cut off the power when the machine is not used.
Please check whether the cover pressing board suits the cover of the documents to be made. Put the right handle at position N CAUTION: 1. Please ensure no impurity get into the adhesive can, such as waste paper, wood dust, steel pin, etc, or the can can be jammed. The folding line should be well folded to ensure the rectangular shape of the spine. The quantity of added adhesive should not overrun the position pointed by the arrow in the can, or the adhesive will overflow.USA Stock ships to USA, Canada and Mexico. We believe that we can produce a positive outcome to any situation to earn your like.
The item "A4 Book Binding Machine Hot Glue Book hardcover Binder +Hot Melting Glue Pellets" is in sale since Tuesday, June 15, 2021. This item is in the category "Business & Industrial\Office\Office Supplies\Filing, Storage & Binding\Binding Machines".
The seller is "optim-factory-store" and is located in Walnut, California. This item can be shipped to United States.