Showroom in Rancho Cucamonga, CA, USA. One Stop Solution for DTF Priting, Screen Printing, Sublimation Heat Transfer. US Stock, CALCA Direct to Film TPU DTF Powder, Digital Transfer Hot Melt Adhesive Powder (44lbs, 20kg/Barrel, Fine, White). CALCA Polyurethane (TPU) hot-melt adhesive powder has excellent bonding and flexibility properties with CALCA DTF inks.
CALCA DTF Powder has a soft and stretchy feel and offers high adhesion. It will stick to the ink and not the film. The colors will turn out bright, vivid and waterproof and they are washable and durable. Resistance to wet and dry washing performance, it is especially suitable for adhesion of high elastic cloth such as Lycra, cotton, nylon, leather, EVA and many other material.They can be printed on cotton and polyester. DTF powder or pretreat powder is a hot melt powder made of polyurethane resin and grinded into adhesive powder. It's used to cover the prints before the process of pressing begins. Premium quality & superior soft hand feel. Great wash resistance, stretchability, not easy to fall off. Easy to separate from the film. Works best with CALCA Inks and Direct Ink Brands. Work with all DTF & DTG printers on the market and both hot and cold PET films for high production output.
2.2lbs of powder has an application of almost about 100-150 A3 sheets. Other Names: Polyurethane hot-melt adhesive powder. Melt point: 230 - 266? Stretchy: Yes (No stretch is optional).Drying Conditions: Naturally dry or hot air dry, take complete drying as standard. Barrel Size: 12.6in x 12.6in x 18.5in (320mm x 320mm x 470mm). Gross Weight: 46.2lbs (21kg). Don't store at freezing or high temperatures. Keep in a cool and dry place not to exceed 75?
Do not store in open, unlabeled, or mislabeled. Keep out of direct sunshine. Avoid contact with eyes/skin and keep out of children. Avoid contact with eyes, skin, and clothing. Keep container tightly closed when not in use.
Avoid breathing mists or vapors. When using do not eat, drink or smoke.
Minimize contact with air to reduce contamination with mold, fungus, or other organisms which could cause decomposition or spoilage. Observe good industrial hygiene practices. Wear appropriate personal protective equipment. If spills occur use proper gloves and absorbent pads to clean and dispose according to your local regulation. IN CASE OF CONTACT: Immediately flush eyes with plenty of water for at least 15 minutes.
Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing. Wash contaminated clothing before reuse. If not breathing, give artificial respiration.
If breathing is difficult, give oxygen. WARNING: May cause damage to organs through prolonged or repeated exposure. Do not breath dust / fume / gas / mist / vapors / spray. Get medical advice / attention if you feel unwell. Dispose of contents/container to an approved waste disposal plant.
Supplemental Information: Stable under normal conditions.