Do It Hot Pot 2 Electric Melting Lead Melts Ingots Quickly 4 Lbs Capacity The

  

WHY SHOULD I USE THE HOT POT 2? The Hot Pot 2 was designed to make lead casting a whole lot easier. It melts lead bars quickly and can process over 20 pounds per hour. The Hot Pot 2 can be plugged into any regular electrical outlet.

Unlike a regular metal furnace, the Hot Pot is small and does not take a lot of preparation. Simply fill it with lead and watch it melt. MELTS LOW-TEMPERATURE ALLOYS - The Hot Pot 2 is capable of melting all low-temperature alloys such as lead, tin, and many more. Whether you are making fishing weights, lead shot, or ingots, the Hot Pot 2 has you covered. It heats up to roughly 750F in under 5 minutes.

PERFECT FOR SINKERS & BULLETS - The Hot Pot 2 works great for melting lead for sinker and casting. Is has pouring spouts on either side to make it easier to pour into the sinker mold or mold.

These spouts also make it much easier and safer to use compared to a traditional electric melting furnace. EASY TO USE - Designed to be easy to use, the Hot Pot 2 is great for both full-scale production and hobbyists. Your or sinker production will drastically increase with the Hot Pot 2! It can melt over 40lbs of lead per hour. As with any equipment that heats up, always ensure that proper safety precautions are taken and clothing is worn. MADE IN THE USA - All Hot Pot 2 lead melting pots are made in the USA using local materials and labor. Thus ensuring that every single unit is of the highest quality.

With an accurate pouring spout built into it, the Hot Pot 2 is far easier and safer to use than traditional lead melting pots. Other pots require the user to use a metal scoop to scoop up the molten metal and then pour it into the molds. With the Hot Pot 2, you can pour the molten metal directly into the mold! This greatly reduces the risk of splashes and splatters. The Hot Pot 2 comes with a non-conductive stand.

The stand has plastic feet to ensure that whatever surface you use the Hot Pot 2 on does not get damaged. Please be aware that the stand will still get hot! Do not touch it with bare hands; always use gloves when you are working with molten metals and other hot surfaces. The Hot Pot 2 has built-in heating coils, keeping everything contained in one small and compact package! The heating coils heat up the pot to about 750 degrees Fahrenheit or 375 degrees Celsius. It takes roughly 5 minutes to reach the maximum heat, but then you will be able to melt 1lb ingots in less than 20 seconds!