Hot Melt Adhesive Dispenser Upgrade Lamps and Lanterns Tool Injection Machine

  

The power of the new glue injection machine is upgraded from 650w to 800w, and the glue melting speed is faster. Improved efficient heat preservation device, better energy saving. The perfluorinated sealing ring is replaced, which has better temperature resistance. The angle of the rubber nozzle is adjusted, which is more suitable forchanging lamp.

Name: Hot melt glue dispenser. Light weight, small volume and convenient to move. You can place it on the workbench at will.

Easy to open the tank, convenient to feed, high safety. Energy saving, effective reduction of enterprise production low cost. The structure is simple and easy to maintain. Only follow the instructions for use and maintenance to maintain.

The pressure and flow can be adjusted. The spray flow can be controlled freely by air pressure and the stroke of the nozzle. The structure is clear, and the minimum system connection is implemented for each part of the components.

The operating temperature range is large. The temperature can be 20c-200c, and can be' used under certain conditions at 250C. Timer can control the amount of glue spray every time. You can choose multiple time controls with control time of 0-60 seconds It's a device.

Needle valve can control the glue to close quickly and sensitively. The air spring closing mode is adopted, and the switch is sensitive. Low equipment cost, saving the early investment for the enterprise. The equipment can be operated independently only after reading the instruction in 10 minutes.

Improve the product performance and grade. Compared with the ordinary hot melt gun, the product is more firm and efficient Higher. Improve efficiency and reduce waste. After the glue is finis'd, it is not necessary to wait for it to be used at any time. No glue dripping, no leakage, Reduce waste.

It has wide application range, no heating type, shape, viscosity, melting temperature, spray method and other restrictions.