Hot Melt Glue Adhesive Spraying Machine Glue Spray Quantitative Glue Dispensers

Hot Melt Glue Adhesive Spraying Machine. Glue Spray Quantitative Glue Dispensers. 1, light weight, small size, easy to move. Can be arbitrarily placed on the work table. 2, the opening of the tank is simple and easy, convenient feeding, high safety.

Save energy, reduce the production cost of the enterprise effectively. 4, the structure is simple and easy to repair. Only according to the instructions of the use and maintenance guidance can be maintained.

5, pressure and flow can be adjusted. Can control the spray pressure and nozzle flow free travel. Using 800W+250W power and high efficiency thermal insulation device. To save energy, improve the melt speed. 7, the failure rate is low.

The structure is clear, and the component parts are connected with the minimum system. The use temperature can be 20 degrees C 200 c, under certain conditions can be used in 260.

9, the timer can control each usage amount. Can choose to control the time for 60 - 0 seconds of a variety of time controller. 10, valve control glue instant off sensitive. The gas is used to open the spring, and the switch is sensitive. 11, low cost of equipment for enterprises to save investment. 12, the operation is simple, the new employees as long as 10 minutes of training that can operate independently of the equipment. 13, improve product performance and grade. Compared with the common hot melt glue gun, the product is bonded more firmly, and the efficiency is higher. 14, improve efficiency and reduce waste. After the glue without waiting, ready to use. No glue noleak adhesive, reduce waste. 15, wide application range, no heating melt type, shape, viscosity, melting temperature, spraying and other restrictions. Scope of application of products. Toys (adhesion fixed wiring, insulation); box sealing, packaging; leather leather handbags; small household appliances, wires, connectors, connectors; audio, photo frame; label; hardware fixation; small paper product adhesive and fixation; small ornaments, arts and crafts, hairpin, etc. Electronic product fixing, bonding, insulation; other need with glue manually or semi automatically using. The use place should be well ventilated and away from open fire. Avoid contact with eyes and skin with melted materials. If the dissolved material comes in contact with the skin, immediately immerse the injured skin in water or cold water, remove the adhesive and rub the swelling with silicone oil after cooling, and send to the hospital for treatment. A 103A hot melt adhesive machine(056262).

Orders are processed from Monday-Friday; Not on the weekends & public holidays. We will work with you to get the case resolved in the fastest method. Please contact with us at first for more details.

If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it's much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on. If an item is received damaged, customer service must be contacted within 7 days of receiving your item.

Payments via eCheck do not clear immediately. Usually you will wait 5-7 days after checkout for it to clear.

This item is in the category "Business & Industrial\Adhesives, Sealants & Tapes\Adhesive Guns & Dispensers\Hot Glue Dispensers".doprmr2gh" and is located in this country: US. This item can be shipped to United States.

Model: 220V 800W
MPN: 056262
Brand: INTBUYING
Heating tank capacity: 1.0L
Melt rate: 5.5lbs/hour
Operating temperature: 50℃-300℃
The glue: Glue, strip and spray
UPC: 757273830604