Hot Melt Machine PU Round Belt Welding Connector Polyurethane Strips Bonding

  
Hot Melt Machine PU Round Belt Welding Connector Polyurethane Strips Bonding. The shell of the fuser is made of iron sheet, which is of better quality than plastic. When connecting, the temperature of the hot melt must be within 250 degrees, otherwise the physical properties of polyurethane will be affected. When the docking temperature is too high, the interface of polyurethane round belt is easy to break. Use scissors to cut the cuts at both ends of the round belt flat (if both ends are not flat, the hot melt on the surface of the round belt is not sufficient, and the interface is easy to break).

Fix the cut round belt on the connector (connecting pliers). Adjust the hot melt to 250 ° C and melt the round strips at both ends fixed on the connector (connecting pliers). After the hot melting of the round belt, lock the connector (connecting pliers) for about 2-3 minutes and wait for the round belt to cool.

Take out the round belt, polish and trim the joint, and the interface shall be flat, smooth and firm without fracture. This item is in the category "Home & Garden\Tools & Workshop Equipment\Power Tools\Welding & Soldering Tools". The seller is "feelinggood_official" and is located in this country: CN.

This item can be shipped worldwide.

1. Color: Set 6
2. Model: 3875728384
3. Country/Region of Manufacture: China
4. Custom Bundle: No
5. Item Height: Standard
6. Item Width: Standard
7. Power Source: Corded Electric
8. Type: Power Tool Parts
9. MPN: 3875728412
10. Item Length: Standard
11. Item Weight: Standard
12. Brand: Unbranded
13. Manufacturer Warranty: No
14. Item Diameter: Standard
15. Voltage: 220V