Socket type hot melt welding machine PE butt welding machine PPR water? 40-160mm

  

Socket type hot melt welding machine PE butt welding machine PPR water pipe hot melting machine With Die head? 40mm, 50mm, 63mm, 75mm, 90mm, 110mm, 160mm. Purpose: This product is suitable for hot melt socket welding of thermoplastic pipes such as PPR / PE / Pb / pe-rt. Accurate temperature control, high safety index and strong environmental adaptability.

The heat transfer plate is made of high-quality aluminum alloy, with high thermal conductivity and strong anti-oxidation energy. Solid structure, convenient and fast, never leak. The unique non stick plastic high temperature coating (PTFE) technology is adopted for the hot melt die head, which has a long service life. Changing the die head can be used for the connection of various caliber plastic pipe fittings (specification:?

Fix the fusion splicer, install the heating end, place the welding connector on the rack, install the corresponding heating die head according to the required pipe specification, and tighten it with hexagon socket, which is generally small in the front end and large in the rear end. Turn on the power supply (note that the power supply must be equipped with grounding protection wire), and pay attention to the change of the indicator light according to the instructions of the corresponding model of machine. The operation can be started only when the welding device enters the working temperature control state. The pipe cutter is used to cut the pipe vertically, and the pipe and pipe fittings are pushed into the die head of the fusion splicer without rotation at the same time, and the operation is carried out according to the requirements. After the heating time is reached, the pipe and pipe fittings are immediately removed from the die head and inserted into the required depth quickly and evenly without rotation to form a uniform flange at the joint.